![ALLNET ALL-MCI2011P-60W / Mediacon. 1G TX PoE AT -> 1G SFP](https://www.alma-networks.es/media/image/48/0e/09/134035_600x600.jpg)
- N.º artículo: 134035
Highlights:
-
Hardened 60W Gigabit POE converter
-
designed with hardened Marvell IC
-
1x10/100/1000M 60W PSE (supports 802.3af/at) TX + 100/1000M SFP
-
48-56VDC Redundant Power-Input
-
Operating temp: -40°C to +75°C
This Rugged 60 Watts Industrial POE converter is designed with hardened Marvell IC, it delivers 60Watts POE power to your PD. It also can tolerate extreme temperature in a harsh environment. Our ColdDesign technology will not only power up your PD device, also reduce the excessive heat problem to a minimum. It accepts the input voltage from 48VDC to 56VDC to meet IEEE802.3af/at required voltage. It is being rigorously tested for your Security, Transportation and Telco application.
Technical Detail:
Element |
Specification |
Standards: |
IEEE 802.3 10BaseT |
Network Connections: |
1x 10/100/1000BaseT (RJ-45) |
Data Processing: |
Half/Full-Duplex on TP |
PoE: |
IEEE802.3at/af compatile |
Flow Control: | IEEE802.3x Flow Control and Back Pressure |
Jumbo Frame | 9KB |
Packet Buffer Size | 1M |
MAC adress Table Size | 2K |
Network Cable: |
TP:10/100/1000BaseT Cat. 5, 5E, 6 UTP/STP, till 100 m |
POE Pin Assignment: | 60 watts 4 pairs V+, V+, V-, V- for pin 1, 2, 3, 6 V+, V+, V-, V- for pin 4, 5, 7, 8 |
DIP Switch: | To select SFP speed 100M or 1000M. |
Reverse polarity protection: | Present |
Overload current protection: | Present |
LED: |
PW1(power 1) Green: ON- power good, OFF-power failed |
Power Supply: |
4pin Terminal Block 48V-56V VDC Power Input |
Power Consumption: | 2W@48VDC without PoE |
PoE Power: | Maximum PoE Power 72W at 56VDC Input |
Alarm Relay Contact: | Relay outputs with current carrying capacity of 1 A @24VDC, Relay in short circuit mode when power fails. in open circuit mode when power supply is connected |
Removable Terminal Block: | Provide 4 pin terminal block Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire(AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
Case Dimension (L X W X D)mm |
103.5mmx32mmx81.5mm (LxWxD) |
Installation mounting: | DIN Rail mounting and Wall Mounting |
Housing: | Rugged Metal, IP30 Protection |
MTBF ( mean time between failure) | 510,304 hrs ( MIL-HDBK-217F) at 25°C |
Environment: |
Operating Temperature: -40° ~ +75° °C |
Marks: |
CE, FCC, VCCI |
Shock: |
EN50155 / EN 60068-2-27 |
Free Fall: |
EN5055 / EN 60068-2-32 |
Vibration: | EN 50155 / IEC 60068-2-6 |
EMI: | FCC Part 15 Supbart B Class A CE EN 55022 Class A |
Features: | Industrial, PoE |
Fibre Anschluß: | SFP |
Geschwindigkeit: | 1G |