ALLNET ALL-SWI8142BP Switch PB 4x PoE + 2x SFP Gigabit

404,69 € *

Precios incl. IVA legal más gastos de envío

En breve, disponible de nuevo.

  • 134037
A destacar: Power Booster de alto rendimiento -- 12V/24V/48VDC Inyector Gigabit PoE...más
Información del producto "ALLNET ALL-SWI8142BP Switch PB 4x PoE + 2x SFP Gigabit"

A destacar:

  • Power Booster de alto rendimiento -- 12V/24V/48VDC
  • Inyector Gigabit PoE industrial robusto de 6 puertos
  • 4x10/100/1000M TX PSE (802.3af/at POE+)
  • 2 slots SFP 100/1000M para módulos MiniGbic
  • Amplificador de tensión de 12/24/48VDC hasta 55VDC
  • Rango de tensión de entrada 12-56VDC
  • Temperatura de funcionamiento ampliada: de -40°C a +75°C

Introducción

El Switch industrial POE+ de 6 puertos de alta potencia está equipado con nuestra tecnología ColdDesign de alta eficiencia que permite que el bajo voltaje de entrada, como 12/24/48VDC, se incremente hasta 55VDC para cumplir con los requisitos de IEEE802.3at. La tecnología ColdDesign no sólo aumentará la tensión de entrada, sino que también reducirá el problema del calor excesivo al mínimo. Acepta un voltaje de entrada tan bajo como 12VDC, para aumentar hasta 55VDC. Y también está equipado con 2 puertos SFP que pueden ser utilizados como redundancia, en cascada a sus otros dispositivos para ampliar su aplicación de red. Ha sido probado rigurosamente para sus aplicaciones de seguridad, transporte y telecomunicaciones.

Características técnicas:

IEEE Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-X Gigabit Ethernet
IEEE802.3x Flow Control and Back Pressure,

IEEE802.3af for POE

IEEE802.3at for POE+

Switch Architecture

Back-plane (Switching Fabric): 12Gbps

Data Processing

Store and Forward

Flow Control:

IEEE 802.3x Flow Control and Back Pressure

Jumbo Frame

9KB

MAC address Table Size

1K

Packet Buffer Size

1M

Network Connector :

5xRJ-45 10/100/1000BaseT(X) auto negotiation,

4 Giga POE+ 802.3at/af 30W PSE per port
Auto MDI/MDI-X function, Full/Half duplex                                            
2 x SFP 100/1000M BaseX  

Network Cable

UTP/STP Cat.5e or above Cable

EIA/TIA-568 10-ohm (100m)

Fiber Cable (Multi-mode):50/125um,62.5/125um
Fiber Cable (Single-mode): 9/125um

Protocol

CSMA/CD

LED

PW1(Power 1) Green,

PW2(Power 2) Green,

ERR (Fault) Amber,

TX/RJ-45 port:

LNK (Link/Active) Green,

SPD(Speed) 10/100(OFF) ,1000 (Green)

SFP Fiber Per port:

Link (Green)

Active Flash

DIP Switch

DIP 1:   OFF: Port 5 SFP ON (DEFAULT)
              ON: Port 5 SFP OFF
DIP 2:   OFF: SFP 1000M (DEFAULT)

              ON: SFP 100M

Reserve polarity protection

Present

Overload current protection

Present

Power Supply

Redundant Dual DC 12V-56V Power Input

Power Consumption

5.76W@12/24/48 VDC full load, Without POE

Alarm Relay Contact

Relay outputs with current carrying capacity of 1 A @24VDC,  

Relay in short circuit mode when 2 powers are connected. in open circuit mode when only one power supply is connected

POE power

POE power per port 30watts. Maximum 36Watts per port at 12/24/48VDC input

Maximum total power 126Watts at 24VDC and 48VDC power input.

Maximum total power 65W at 12VDC power input

Removable Terminal Block

Provide 2 Redundant power, Alarm relay contact ,6 Pin

Wire range: 0.34mm^2 to 2.5mm^2

Solid wire (AWG):12-24/14-22

Stranded wire(AWG): 12-24/14-22

Torque:5lb-In/0.5Nm/0.56Nm

Wire Strip length: 7-8mm

Operating Temperature

-40° ~ 75° fully tested.

Operating Humidity

5% to 95% (Non-condensing)

Storage Temperature

-40° ~ 85° C

MTBF (mean time between failure)

510,304 hrs ( MIL-HDBK-217F) at 25°C

Housing

Rugged Metal, IP30 Protection

Case Dimension (L x W x D)

142mmx43mmx105mm (LxWxD)

Installation mounting

DIN Rail mounting and Wall Mounting

 

Certifications:

EN55022/24

ITE equipment

EN50155

Railways Applications Electronic Equipment used on Rolling Stock

EN55011

Industrial, Scientific and Medical (ISM) equipment

EN50121-3-2

Railway Applications – Electromagnetic Compatibility – Part 3-2 Rolling Stock - Apparatus

EN50121-4

Railway Applications – Electromagnetic Compatibility – Part4 Emissions and Immunity of the Signaling and Telecommunications Apparatus

Safety

IEC EN60950-1

EMC/EMS 

CE, FCC, VCCI

EMI

FCC Part 15 Subpart B Class A,
CE EN 55022 Class A

EN 50155 / EN 60068-2-6

Vibration

EN 50155 / EN 60068-2-27

Shock

EN 50155 / EN 60068-2-32

Free Fall

 

Einsatzort Switch: Industrial DIN
LAN Geschwindigkeit: 1Gbit/s
PoE Budget: <200 Watt
PoE Port Leistung: 30W at
SFP Geschwindigkeit: SFP 1GBit
Management: unmanaged
Belüftung Switch: Mit Lüfter
Anzahl Ports PoE/LAN: 4/1
Extra Features: Power Booster
SFP Port Anzahl: 1
Enlaces de continuación a "ALLNET ALL-SWI8142BP Switch PB 4x PoE + 2x SFP Gigabit"
Leer, escribir y debatir reseñas...más
Valoraciones de clientes para "ALLNET ALL-SWI8142BP Switch PB 4x PoE + 2x SFP Gigabit"
Escribir valoración
Las valoraciones se desbloquearán tras su comprobación.

Los campos marcados con un * son obligatorios.

He leído y acepto la Política de privacidad.

Últimos vistos