![AVM FRITZ!BOX 55xx Fiber zbh. AON Replacement GBIC "ALL4786-AON](https://www.alma-networks.es/media/image/f3/89/d3/217024_600x600.jpg)
Precios incl. IVA legal más gastos de envío
Listo para envío inmediato, tiempo de entrega aprox. 1-3 días hábiles
- N.º artículo: 217024
AVM FRITZ!BOX 5530 Fiber zbh. AON Replacement GBIC "ALL4786-AON"
ATTENTION:
Works in an ONT. This GBIC is only the fibre wave GBIC for the standard AON. A matching ONT with the corresponding modem ID is still required.
Highlights:
- ITU-T G.652; IEEE 802.3ah-2004 1000BASE-BX10
- LC-APC 8°
- Wavelength: TX 1310 nm, RX 1480 to 1580 nm
- Full duplex transmission
- Transmit power: -9 to -3 dBm
- Receive power range: -3 to -23 dBm
- Range: 10 km
- Support of SFF-8472
- Laser class 1
- Compatible with AVM Fritz Art. 2000 2940
Technical Details:
1.25Gbps BiDi LC/APC 20Km SFP Transceiver ALL4786-AON
Product Features
- Up to 1.25Gbps data links
- 20Km with 9/125µm SMF
- Tx1310nm/ Rx1490nm
- BiDi Simplex LC/APC Connector
- Hot-pluggable SFP footprint
- Single 3. 3V power supply
- Operating temperature: 0~70?
- DDMI
- SFF-8472-Compliance
- RoHS
Applications
√ 1.25Gbps 1000Base-LX
PART NUMBER |
WAVE LENGTH TX/RX |
DISTANCE |
LASER |
TEMPERATURE |
ALL4786-AON |
1310nm/1490nm |
20km |
FP/PIN |
0~70? |
Product Description
The ALLNET ALL4786-AON SFP is small form factor pluggable (SFP) transceivers compatible with multi-sourcing agreement (MSA). It is suitable for single-mode fiber (SMF) communications in 1.25Gbps Ethernet and 1G/2G Fiber Channel.
Regulatory Compliance
ALLNET ALL4786-AON transceivers are Class 1 Laser Products comply with FDA regulations. Meet Class 1 eye safety requirements of EN 60825 and the electrical safety requirements of EN 60950.
Absolute Maximum Ratings
Parameter |
Symbol |
Min. |
Max. |
Unit |
Supply Voltage |
VCC |
-0.5 |
3.6 |
V |
Storage Temperature |
TS |
-40 |
85 |
°C |
Operating Case Temperature |
TC |
0 |
70 |
°C |
Recommended Operating Conditions
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Operating Case Temperature |
TC |
0 |
70 |
°C |
|
Power Supply Voltage |
VCC |
3.15 |
3.3 |
3.45 |
V |
Power Supply Current |
ICC |
300 |
mA |
||
Data Rate |
1.25 |
GBps |
|||
Max Link Length on 9/125µm SMF |
Lmax |
20 |
km |
Electrical Characteristics
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Transmitter |
|||||
Input Differential Impedance |
Zin |
90 |
100 |
110 |
Ω |
Data Input Swing Differential |
Vin |
500 |
2400 |
mV |
|
Tx-Dis Disable |
Vd |
2.0 |
Vcc |
V |
|
Tx-Dis Enable |
Ven |
0 |
0.8 |
V |
|
TX-Fault (Fault) |
2.0 |
Vcc+0.3 |
V |
||
TX-Fault (Normal) |
0 |
0.8 |
V |
||
Receiver |
|||||
Data Output Swing Differential |
Vout |
370 |
2000 |
mV |
|
Rx-Los Fault |
Vlf |
2.0 |
Vcc+0.3 |
V |
|
Rx-Los Normal |
Vln |
0 |
0+0.8 |
V |
Optical Characteristics
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Transmitter |
|||||
Centre Wavelength |
λc |
1290 |
1310 |
1330 |
nm |
Spectral Width (RMS) |
σ |
4 |
nm |
||
Average Output Power |
Pout |
-9 |
-3 |
dBm |
|
Extinction Ratio |
ER |
9 |
dB |
||
Optical Rise/Fall Time |
tr/tf |
2 |
ns |
||
Receiver |
|||||
Centre Wavelength |
λc |
1470 |
1490 |
1610 |
nm |
Receiver Sensitivity |
PIN |
-23 |
dBm |
||
Receiver Overload |
PMAX |
-3 |
dBm |
||
LOS De-Assert |
LOSD |
-30 |
dBm |
||
LOS Assert |
LOSA |
-35 |
dBm |
||
LOS Hysteresis |
0.5 |
4.5 |
dB |
Pin Descriptions
Pin |
Symbol |
Description |
Ref. |
1 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
6.1 |
2 |
TFAULT |
Transmitter Fault. Not supported. |
|
3 |
TDIS |
Transmitter Disable. Laser output disabled on high or open. |
6.2 |
4 |
MOD_DEF(2) |
Module Definition 2. Data line for Serial ID. |
6.3 |
5 |
MOD_DEF(1) |
Module Definition 1. Clock line for Serial ID. |
6.3 |
6 |
MOD_DEF(0) |
Module Definition 0. Grounded within the module. |
6.3 |
7 |
Rate Select |
No connection required |
|
8 |
LOS |
Loss of Signal indication. Logic 0 indicates normal operation. |
6.4 |
9 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
6.1 |
10 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
6.1 |
11 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
6.1 |
12 |
RD- |
Receiver Inverted DATA out. AC Coupled. |
|
13 |
RD+ |
Receiver Non-inverted DATA out. AC Coupled. |
|
14 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
6.1 |
15 |
VCCR |
Receiver Power Supply |
|
16 |
VCCT |
Transmitter Power Supply |
|
17 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
6.1 |
18 |
TD+ |
Transmitter Non-Inverted DATA in. AC Coupled. |
|
19 |
TD- |
Transmitter Inverted DATA in. AC Coupled. |
|
20 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
6.1 |
Notes:
-
- Circuit ground is internally isolated from chassis ground.
- Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
-
- Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in.
- LOS is open collector output. Should be pulled up with 4.7k -10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
- EEPROM & DDM THRESHOLD
-
- EEPROM
2 wire address 1010000X (A0hex)
0~95 Serial ID Defined by SFP MSA (96 bytes) |
96~127 Vendor Speific (32 bytes) |
128~255 Reserved (128 bytes) |
*Customized Area
Address |
Description |
Hex Data |
ASCII |
A0 20~35 |
Vendor Name |
41 4c 4c 4e 45 54 20 47 6d 62 48 |
ALLNET GmbH |
-
- DDM THRESHOLD
ALL4786-AON
Low Alarm |
Low Warn |
High Warn |
High Alarm |
|
Temp |
-5? |
0? |
70? |
75? |
Voltage |
3V |
3.1V |
3.6V |
3.7V |
Tx Bias |
3mA |
4mA |
70mA |
75mA |
Tx Power |
-13.5dBm |
-9.5dBm |
-1dBm |
1dBm |
Rx Power |
-23dBm |
-19dBm |
-3dBm |
1dBm |
Recommend Circuit
Mechanical Specifications
Recommend Circuit
Mechanical Specifications