ALLNET SGC5410PM-10G Apollo Full Managed 10x / 8x 2,5GB

ALLNET SGC5410PM-10G Apollo Full Managed 10x / 8x 2,5GB

487,09 € *

Precios incl. IVA legal más gastos de envío

Listo para envío inmediato, tiempo de entrega aprox. 1-3 días hábiles

N.º artículo: 221097

Destacados: 8x 2.5GbE PoE 2x SFP+ 10G para Uplink Soporta PoE IEEE802.3af / at con...más

Cerrar menú

Información del producto "ALLNET SGC5410PM-10G Apollo Full Managed 10x / 8x 2,5GB"

Destacados:

8x 2.5GbE PoE
2x SFP+ 10G para Uplink
Soporta PoE IEEE802.3af / at con 30W max. 30W por puerto
PoE Budget 240W
Soporta Jumbo Frames
Soporta IGMP snooping v1/v2/v3
Soporta Link aggregation
Soporta Loop protection
Soporta Spaning Tree Protocoll (STP) y Rapid Spanning Tree (RSTP)
Funciona como switch independiente o con el controlador Apollo (véase ALL-AC100)

Cada vez hay más aplicaciones que necesitan un conmutador Ethernet más rápido. Los switches MultiG de ALLNET Apollo admiten AP Wi-Fi 6/6E/7 más rápidos, aceleran la carga y descarga de archivos grandes, hacen que las videoconferencias sean más fluidas y evitan las fluctuaciones.

Ecosistema de dispositivos 2.5G / 10G

Aplicaciones

Multi-GE

Interfaz de acceso Multi-GE

El ancho de banda de enlace ascendente de los AP WLAN ha aumentado de 2,5 Gbps en 802.11ac a 5 Gbps o 10 Gbps. El acceso gigabit tradicional no puede satisfacer los requisitos de ancho de banda de enlace ascendente de los AP. Los switches Multi-GE de Emplus los puertos soportan 100M*/1/2.5Gbps incluso 5G/10Gbps (serie SMX) auto-sensing, cumpliendo con los requisitos de ancho de banda de los APs inalámbricos de alta velocidad en la era Wi-Fi 6. En respuesta al estándar Wi-Fi de próxima generación (Wi-Fi 7), la familia de conmutadores Multi-GE de Emplus con funciones Wi-Fi 7 estará disponible próximamente.

Puertos de conmutación Multi-GE con autonegociación de velocidades de 100 Mbps, 1 Gbps, 2,5 Gbps y 5 Gbps en el cable Cat5e existente, y hasta velocidades de 10 Gbps en el cableado Cat6a más reciente (tabla inferior).

Cable	1 G	2.5G	5 G	10G
Cat5e	•	•	•	N/A
Cat6	•	•	•	• (55m)
Cat6a	•	•	•	•

*100Mbps does not support half-duplex mode

Spanning Tree Protocol (STP)

Admite el protocolo estándar IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) para una convergencia más rápida.

Loop protection

Si el conmutador detecta un bucle, desactiva el puerto de origen para que no reenvíe paquetes de datos originados en el conmutador para evitar tormentas de difusión.

Jumbo frame support

Admite un tamaño de trama de hasta 10K bytes para mejorar el rendimiento de las transferencias de datos de gran tamaño.

IGMP snooping v1/v2/v3

Mejora el rendimiento de la red mediante el filtrado de multidifusión, en lugar de inundar el tráfico en todos los puertos.

Link aggregation

Agrupa varios puertos hasta un máximo de ocho (8) puertos por troncal de forma automática mediante el protocolo de control de agregación de enlaces (LACP).

Software Features - Apollo

System Information

System Name

System Location

System Contact

System System Features

IPv4 Settings
-IP address / Subnet mask
-DHCPv4

IPv6 Settings
-Global address
-Link-local address
-DHCPv6

Domain Name System (DNS)
-IPv4 (Support 4 Servers)

Port

Port Configuration
-Speed configuration
-Flow control (802.3x, back pressure)
-Port description (support 128 bytes)
-Port extend mode

IEEE 802.3az Energy Efficient Ethernet (EEE)

MAC Address Table
-MAC address table (16K)
-Age Time
-Static MAC address

Jumbo Frame
-Per-Port/Per-system (9216 bytes)

Spanning Tree
-802.1w rapid spanning tree
-802.1s multiple spanning tree
-MSTP instance (16 instances)
-Per device BPDU forward
-Per port BPDU forward
-Per port BPDU Filter
-Per port BPDU Guard
-Per port Root Guard
-Edge port mode
-Point to Point mode
-Per port admin state

Loopback detection
-STP independent + port base shutdown only

Multicast Filtering
-Unknown Multicast Drop (unregistered multicast filtering)
-Unknown Action-Drop/Flood/Router Port

Multicast Group
-Support Max. multicast group (256 groups)

IGMP Multicast Forwarding
-MAC Group Address FDB

IGMP Snooping
-Support v1, v2, v3 awareness
-IGMP snooping fast leave (per-vlan)
-IGMP querier
-Dynamic router port
-Static/Forbidden router

MLD Multicast Forwarding
-MAC Group Address FDB
-IP Group Address FDB

MLD Snooping
-Support v1
-MLD snooping fast leave (per-vlan)
-MLD querier
-Dynamic router port
-Static/forbidden router

802.3ad Link Aggregation
-Static Trunk
Max. 8 ports/group
Max. 8 groups per device
-Dynamic Trunk (LACP)
Max. 8 ports/group
Max. 8 groups per device
-Load Balance Algorithm (source/destination MAC, VLAN, EtherType, source/destination IP address, TCP/UDP ports)
-LA description

802.1ab Link Layer Discovery Protocol (LLDP)

EOAM
-SFP information, SFP+ DDM
-Cable diagnostic
-Port statistics

DHCP

IPv4 DHCP Relay
-DHCP Relay
-Max. IPv4 DHCP servers
-Option82 Status
-Option82 Strategy (Keep/Replace/Drop)

IPv4 DHCP Snooping
-DHCP Snooping
-Binding list
-Statistics

VLAN

802.1Q Support

VLAN Group
-VID from 1-4094 (Max. 256 VLAN groups)

GVRP
-Dynamic VLAN groups
-Per port / device enable / disable
-VLAN advertisement

Voice VLAN

L3 Interface

Multiple IP Interface
-Max. 4 IP interfaces
-Max. 4 Ip v4 address
-20 IPv6 address (shared for both link local and global address)

ARP Table
-Max. 192 ARP entries

Static ARP
-Static 192 ARP entries (Share with ARP Table)

ARP Age Time

IPv6 Neighbor Discovery Table
-Max. 42 ND entries

Static IPv6 Neighbor Discovery
-Static 42 ND entries (Share with IPv6 Neighbor Discovery Table)

L3 Routing

IPv4 Static Route and Default Route
-Max. 63 entries

IPv4 Default Route
-Max. 1 entry

IPv4 Route Table

IPv6 Static Route
-Max. 21 entries

IPv6 Default Route
-Max. 1 entry

IPv6 Route Table

Interface specific select
-Per VLAN

RIP

OSPF

L3 IP Multicast

IGMP
-IP group address FDB

MLD
-IP group address FDB

QoS

Trust Mode
-Cos/802.1p
-DSCP
-CoS/802.1p-DSCP

Per Port Trust Mode
-Enable-follow the global trust type
-Disable-Always go to the lowest priority queue.

Queue
-Number of priority queues supported-8

CoS Mapping

CoS Based on 802.1p Priority

CoS Based on Physical Port

CoS Based on DSCP/TOS

Scheduling Mechanism
-Strict/WRR/Strict + WRR

Queue Weight Bandwidth

Bandwidth Control
-Rate limit according to network speed 16kbps~1000Mbps-in step of 16kbps

Advanced QoS

Security

802.1X Authentication Protocol
-Local/RADIUS/TACACS+

802.1X Port-based Access Control

802.1X Authenticated Hosts

802.1X Guest VLAN

RADIUS-VLAN assignment

EAP/RADIUS of Port Statistics

Port Security (Limited Dynamic Lock)

Storm Control
-Support broadcast/unknown multicast/unknown unicast 16kbps~1000Mbps - in step of 16kbps

Port Isolation (Protected Ports)

DOS Attack Prevention

Access Control List (ACL)
-Ingress/Egress
-MC Based ACL
-IPv4 Based ACL
-IPv6 Based ACL
-MAC Range Mode
-IP Range Profile
-ACL Binding
-Action-Permit/Deny/Shutdown/Rate Limit

Management VLAN

Radius Server
-IPv4 / IPv6 / hostname(IPv4)

AAA

Security Password
-Requires a user to generate a new means of authentication before access is granted to the device for the first time.

PoE management
-Power on/off per port
-Power class configuration (autoclass/userdefine)
-Power feeding with priority
-Power budget limit

PD LifeGuard

Account Manager
-Muti Privileges

Web Graphical User Interface (GUI)
-HTTP IPv4 / IPv6
-HTTPS IPv4 / IPv6

Web support multi-language
-Language support

SNMP v1/v2/v3 Support

RMON 1, 2, 3, 9
-Support 4 groups of RMON (1-statistics, 2-history, 3-alarms, 9-events)

SSH Server
-IPv4/IPv6

AAA

Telnet Server
-IPv4/IPv6

TFTP Client
-IPv4/IPv6

Port Mirroring
-Support 1 to 1 and many to 1
-Max. mirroring session-3
-Tx/Rx/both mirroring

Dual Images

Image upgrade/backup
-Firmware upgrade (TFTP/HTTP)

Configuration upgrade/backup
-TFTP/HTTP

Configuration Saving
-Manual/Auto Save

System Time
-Time setting/daylight saving

Simple Network Time Protocol (SNTP)
-IPv4/IPv6/hostname(IPv4) SNTP server
-Daylight Savings Time
-Port number for SNTP server

Web UI Supports Non-IE Browser
-Chrome, Firefox, Safari

SYSLOG
-Support log admin password/IP change activity enhancement
-Local logging-buffered/flash
-Remote logging-IPv4/IPv6/hostname(IPv4)
-Originator Identifier-None/Hostname/Ipv4/Ipv6/User Defined

SYSLOG Backup
-Buffered

Ping
-IPv4/IPv6/hostname(IPv4)

Trace Route
-IPv4/IPv6/hostname(IPv4)

Factory Default

Reboot Switch

Flick Reboot

MIB Support

MIB II
-RFC1213

Bridge
-RFC1493

RMON
-RFC1757

802.1p
-RFC2674

LLDP MIB
-RFC2863

Pubic Mib From Cloud Agent
-ReadOnly

Physical Interfaces

Multi GE PoE Switch
ALL-SGC5410PM-10G
330 x 44 x 230 mm

Technical Details:

Multi GE PoE Switch

	ALL-SGC5410PM-10G
Copper Ports	8x 2.5GbE
SFP Ports	-
SFP+ Ports	2x 10GbE
PoE Available Ports	8
PoE Standard	802.3af/at
PoE Power Budget	240W
Switch Chip	RTL9302C
PHY	GPY241
PoE Controller	RTL8238B
Flash Memory	16MB NOR 128MB NAND
SDRAM Memory	512MB DDR3
Packet Buffer	12Mbit
MAC Table Size	16K
Switching Capacity	80Gbps
Fan(s)	2
Power Supply	Int. PSU 300W
Dimensions (W x H x D)	330 x 44 x 230
Operating Temperature	0°C to 50°C

Management:	Apollo Series (Apollo Controller) , full managed
PoE Port Leistung:	30W at
SFP Port Anzahl:	2
Anzahl Ports PoE/LAN:	8/0
Einsatzort Switch:	19"
PoE Budget:	<300 Watt
LAN Geschwindigkeit:	1Gbit/s, 2,5GBit/s, 100 Mbit/s
Belüftung Switch:	Mit Lüfter
SFP Geschwindigkeit:	SFP+ 10GBit

Enlaces de continuación a "ALLNET SGC5410PM-10G Apollo Full Managed 10x / 8x 2,5GB"

Leer, escribir y debatir reseñas...más

Cerrar menú

Valoraciones de clientes para "ALLNET SGC5410PM-10G Apollo Full Managed 10x / 8x 2,5GB"

Escribir valoración

Las valoraciones se desbloquearán tras su comprobación.